Running Jobs
Running jobs on Penzias, Appel and Karle
The jobs on these servers must and can start only from common file system called scratch. This file system is not a main file system and does not hold home directories for users. Consequently, users must prepare the set of job related files in their /scratch/<userid> directory before submit a job. The set includes:
- Input files for the job;
- Parameter(s) file(s) for the job (if applicable);
- Correct job submission script.
Input files
Input files can be locally generated or directly transferred to /scratch/<userid> using file transfer node. However HPCC recommends a transfer to user's home directory first (/global/u/<userid) before copy needed files from user's home (/global/u/<userid> ) to /scratch/<userid>. Files can be transferred from users' local storage to DSMS (/global/u/<userid) using cea and/or Globus. The submission script file must be created with use of Unix/Linux text editor. Note that MS windows Word is a word processing system and cannot be used to create the job submission scripts. Users are advised to use Linux/Unix text editor such as VI/Vim; Pico/Nano or Edit.
Running jobs on Arrow
Arrow is attached to 2.1 PB hybrid file system which holds both users' home directories (backup-ed) and scratch directories. The underlying files system tiers the user files automatically so it ensures the best possible performance. In the same way as described above the users must prepare and place set of job related files including correct job submission file in /scratch/<userid> before submit the job. Valuable files must be preserved in /global/u/home.
Input file on /scratch
The general case is that you will have input files that have data on which you wish to operate. To compute or work on these files, they must be stored within the /scratch/<userid> directory of the HPC system you wish to use. These files can come from any of the following sources:
- • Users can create files using a text editor. Note that Microsoft Word is word processing software and is not a text editor suitable for job. Users must use a Linux/Unix based text editor such as Vi/Vim, pico, nano, or edit.
- • Users can copy files from their local storage (i.e. disk on user's laptop) to user's directory in /scratch and/or user's home directory in DSMS. HPCC recommend the files to be copied to home directories first and then staged on /scratch. For this operation users can use file transfer node (cea) or Globus online. Note that file transfer via ftp is not supported.
Inroduction
SLURM is open source scheduler and batch system which is implemented at HPCC. Currently SLURM is used only for Penzias’ job management but the use of SLURM will be expanded to other servers in the future.
SLURM commands:
Slurm commands resemble the commands used in Portable Batch System (SLURM). The below table compares the most common SLURM and SLURM Pro commands.
A few examples follow:
If the files are in /global/u
cd /scratch/<userid> mkdir <job_name> && cd <job_name> cp /global/u/<userid>/<myTask/a.out ./ cp /global/u/<userid>/<myTask/<mydatafile> ./
If the files are in SR (cunyZone):
cd /scratch/<userid> mkdir <job_name> && cd <job_name> iget myTask/a.out ./ iget myTask/<mydatafile> ./
Set up job environment
Users must load the proper environment before start any job. The loaded environment wil be automatically exported to compute nodes at the time of execution. Users must use modules to load environment. For example to load environment for default version of GROMACS one must type:
module load gromacs
The list of available modules can be seen with command
module avail
The list of loaded modules can be seen with command
module list
More information about modules is provided in "Modules and available third party software" section below.
Running jobs on HPC systems running SLURM scheduler
To be able to schedule your job for execution and to actually run your job on one or more compute nodes, SLURM needs to be instructed about your job’s parameters. These instructions are typically stored in a “job submit script”. In this section, we describe the information that needs to be included in a job submit script. The submit script typically includes
- • job name
- • queue name
- • what compute resources (number of nodes, number of cores and the amount of memory, the amount of local scratch disk storage (applies to Andy, Herbert, and Penzias), and the number of GPUs) or other resources a job will need
- • packing option
- • actual commands that need to be executed (binary that needs to be run, input\output redirection, etc.).
A pro forma job submit script is provided below.
#!/bin/bash #SBATCH --partition <queue_name> #SBATCH -J <job_name> #SBATCH --mem <????> # change to the working directory cd $SLURM_WORKDIR echo ">>>> Begin <job_name>" # actual binary (with IO redirections) and required input # parameters is called in the next line mpirun -np <cpus> <Program Name> <input_text_file> > <output_file_name> 2>&1
Note: The #SLURM string must precede every SLURM parameter.
# symbol in the beginning of any other line designates a comment line which is ignored by SLURM
Explanation of SLURM attributes and parameters:
- --partition <queue_name> Available main queue is “production” unless otherwise instructed.
- • “production” is the normal queue for processing your work on Penzias.
- • “development” is used when you are testing an application. Jobs submitted to this queue can not request more than 8 cores or use more than 1 hour of total CPU time. If the job exceeds these parameters, it will be automatically killed. “Development” queue has higher priority and thus jobs in this queue have shorter wait time.
- • “interactive” is used for quick interactive tests. Jobs submitted into this queue run in an interactive terminal session on one of the compute nodes. They can not use more than 4 cores or use more than a total of 15 minutes of compute time.
- -J <job_name> The user must assign a name to each job they run. Names can be up to 15 alphanumeric characters in length.
- --ntasks=<cpus> The number of cpus (or cores) that the user wants to use.
- • Note: SLURM refers to “cores” as “cpus”; currently HPCC clusters maps one thread per one core.
- --mem <mem> This parameter is required. It specifies how much memory is needed per job.
- --gres <gpu:2> The number of graphics processing units that the user wants to use on a node (This parameter is only available on PENZIAS).
gpu:2 denotes requesting 2 GPU's.
Special note for MPI users
Parameters are defined can significantly affect the run time of a job. For example, assume you need to run a job that requires 64 cores. This can be scheduled in a number of different ways. For example,
#SBATCH --nodes 8 #SBATCH --ntasks 64
will freely place the 8 job chunks on any nodes that have 8 cpus available. While this may minimize communications overhead in your MPI job, SLURM will not schedule this job until 8 nodes each with 8 free cpus becomes available. Consequently, the job may wait longer in the input queue before going into execution.
#SBATCH --nodes 32 #SBATCH --ntasks 2
will freely place 32 chunks of 2 cores each. There will possibly be some nodes with 4 free chunks (and 8 cores) and there may be nodes with only 1 free chunk (and 2 cores). In this case, the job ends up being more sparsely distributed across the system and hence the total averaged latency may be larger then in case with nodes 8, ntasks 64
mpirun -np <total tasks or total cpus>. This script line is only to be used for MPI jobs and defines the total number of cores required for the parallel MPI job.
The Table 2 below shows the maximum values of the various SLURM parameters by system. Request only the resources you need as requesting maximal resources will delay your job.
Serial Jobs
For serial jobs, --nodes 1 and --ntasks 1 should be used.
#!/bin/bash # # Typical job script to run a serial job in the production queue # #SBATCH --partition production #SBATCH -J <job_name> #SBATCH --nodes 1 #SBATCH --ntasks 1 # Change to working directory cd $SLURM_SUBMIT_DIR # Run my serial job </path/to/your_binary> > <my_output> 2>&1
OpenMP and Threaded Parallel jobs
OpenMP jobs can only run on a single virtual node. Therefore, for OpenMP jobs, place=pack and select=1 should be used; ncpus should be set to [2, 3, 4,… n] where <n must be less than or equal to the number of cores on a virtual compute node.
Typically, OpenMP jobs will use the <mem> parameter and may request up to all the available memory on a node.
#!/bin/bash
#SBATCH -J Job_name
#SBATCH --partition production
#SBATCH --ntasks 1
#SBATCH --nodes 1
#SBATCH --mem=<mem>
#SBATCH -c 4
# Set OMP_NUM_THREADS to the same value as -c
# with a fallback in case it isn't set.
# SLURM_CPUS_PER_TASK is set to the value of -c, but only if -c is explicitly set
omp_threads=1
if [ -n "$SLURM_CPUS_PER_TASK" ];
omp_threads=$SLURM_CPUS_PER_TASK
else
omp_threads=1
fi
mpirun -np </path/to/your_binary> > <my_output> 2>&1
mpirun -np 16 </path/to/your_binary> > <my_output> 2>&1
MPI Distributed Memory Parallel Jobs
For an MPI job, select= and ncpus= can be one or more, with np= >/=1.
#!/bin/bash # # Typical job script to run a distributed memory MPI job in the production queue requesting 16 cores in 16 nodes. # #SBATCH --partition production #SBATCH -J <job_name> #SBATCH --ntasks 16 #SBATCH --nodes 16 #SBATCH --mem=<mem>
# Change to working directory cd $SLURM_SUBMIT_DIR # Run my 16-core MPI job mpirun -np 16 </path/to/your_binary> > <my_output> 2>&1
GPU-Accelerated Data Parallel Jobs
#!/bin/bash # # Typical job script to run a 1 CPU, 1 GPU batch job in the production queue # #SBATCH --partition production #SBATCH -J <job_name> #SBATCH --ntasks l #SBATCH --gres gpu:1 #SBATCH --mem <fond color="red"><mem></fond color>
# Find out which compute node the job is using hostname # Change to working directory cd $SLURM_SUBMIT_DIR # Run my GPU job on a single node using 1 CPU and 1 GPU. </path/to/your_binary> > <my_output> 2>&1
Submitting jobs for execution
NOTE: We do not allow users to run any production job on the login-node. It is acceptable to do short compiles on the login node, but all other jobs must be run by handing off the “job submit script” to SLURM running on the head-node. SLURM will then allocate resources on the compute-nodes for execution of the job.
The command to submit your “job submit script” (<job.script>) is:
sbatch <job.script>
This section in in development
Saving output files and clean-up
Normally you expect certain data in the output files as a result of a job. There are a number of things that you may want to do with these files:
- • Check the content of these outputs and discard them. In such case you can simply delete all unwanted data with rm command.
- • Move output files to your local workstation. You can use scp for small amounts of data and/or GlobusOnline for larger data transfers.
- • You may also want to store the outputs at the HPCC resources. In this case you can either move your outputs to /global/u or to SR1 storage resource.
In all cases your /scratch/<userid> directory is expected to be empty. Output files stored inside /scratch/<userid> can be purged at any moment (except for files that are currently being used in active jobs) located under the /scratch/<userid>/<job_name> directory.